Material: Body & Ball stud 230 M07 Pb leaded low carbon steel
equivalent 95 Mn Pb 28k. tensile strength 430-500N/mm2
Liner: Nylon 6
Protective Finish:
Body & ball stud Zink plated and yellow passivated. The assembly is
lubricated.
AM Ball Joint
- Based on DIN 71802 & 71803
- The Nylon 6 liner provides long life and ultra smooth bearing surface.
- Optional polychloroprene gaiter avaliable to help resist dirt ingress.
- If a fitter gaiter is required please add G to the part number e.g. AMG 8
- The AM Ball Joint is also avaliable without the ball stud allowing assembly on to a pre-positioned stud. Compatible studs are shown on Data Sheets HRBS and HTBSM
- Spanner flats on ball studs and bodies facilitate assembly
- Burnished ball for smoother operation
- Subject to quantity, special threaded bodies and ball studs are avaliable
| Part # | Thread I.S.O A |
B | C | D | E | F | G | H | J | K | L | M | N | Thread I.S.O A |
Q | Ball Dia. Ø |
Weight per 100 in Kg |
| AM 6 | M6x1.0 | 33.0 | 25 | 11.5 | 6 | 8 | 17.8 | 10 | 11 | 5.0 | 32.5 | 8 | 10 | M6x1.0 | 12.5 | 10 | 2.8 |
| AM 8 | M8x1.25 | 40.0 | 30 | 14.0 | 8 | 11 | 20.8 | 13 | 13 | 6.5 | 40.0 | 11 | 13 | M8x1.25 | 16.5 | 13 | 4.9 |
| Am 10 | M10x1.5 | 46.3 | 35 | 15.5 | 10 | 14 | 23.8 | 16 | 16 | 8.0 | 48.0 | 13 | 16 | M10x1.5 | 20.0 | 16 | 8.3 |
| AM 12 | M12x1.75 | 56.3 | 45 | 25.5 | 8 | 14 | 23.8 | 16 | 16 | 8.0 | 48.0 | 13 | 16 | M12x1.75 | 20.0 | 16 | 9.0 |